Hand Drills

Taggart · 03-01-2009, 07:36 AM

I guess they're pretty much just antiques now, but have you ever used a hand drill on wood?

When I was a kid there were some around our place, and I'm sure I used them. I find it very nostalgic to see some of those old tools now.

Twiceshy · 03-01-2009, 09:44 AM

If the economy continues to slide downhill, we may all have to use hand tools!

We keep an eye out for non-electric tools, these days, because we want to be prepared to perform basic nome repairs without having to plug in.

Kitten · 03-01-2009, 01:05 PM

I remember my Mom using hand drills (she was much more into woodwork, building, etc, than my dad was) when I was younger, but I haven't actually used them myself.

Taggart · 03-02-2009, 07:19 AM

If anyone's interested in getting some, I'd suggest checking out the contents sales of houses that have been recently sold.

That's where I saw some interesting tools that were probably technically antiques.

oldnamvet · 03-03-2009, 08:29 AM

I regularly use a brace & bit outside, especially for larger holes in posts or landscape timbers. It is less work than dragging out the power drill and spade bits. For just a starter hole somewhere in the house, I usually use an old Stanley Yankee push drill. If I have a bunch to do, I go for the power drill.

Taggart · 03-03-2009, 08:31 AM

Quote:

Originally Posted by oldnamvet

For just a starter hole somewhere in the house, I usually use an old Stanley Yankee push drill.

Is that the kind with a handle that extends vertically and then turns the bit as you push down?

I've seen one like that and I thought it was very exotic.

oldnamvet · 03-03-2009, 08:43 AM

That is the one. Bits don't look like typical drill bits but they work great for quick pilot holes. They are still made and available from places like Garrettwade.com. I also use the much smaller version for drilling starter holes for scroll saw work. Holes are typically smaller than 1/16".

chocoguy · 03-04-2009, 05:35 AM

I guess that it differs from country to country. In my country we are still hand drills hand drills. My father has one but I couldn’t see it anymore.

angelicwriter · 03-10-2009, 04:43 PM

You know it's this site that lets people auction off and buy old woodworking tools. It's called Oldtools. The site is nice for anyone looking for nostalgic tools.

Here's the link

woodworking · 01-13-2010, 03:06 PM

I've used hand drills on two different occasions:
1. For maple syrup operation in rural Ontario. Brace and bit drill set-up drills 1/2" holes in hard maple very well.
2. For timber framing on a remote site with no power. Pump-type of hand drill worked very well for small diameter predrilling This worked well enough for me to consider buying a hand drill for remote woodworking. Never followed through, though.

danrpierce · 01-25-2010, 12:07 PM

I remember my dad had a similar tool but it was a screwdriver that turned when you pushed down.

http://www.danmacleod.com/Articles/T...crewdriver.jpg
http://www.danmacleod.com/Articles/E..._Tradition.htm

infotechproximity9 · 07-08-2010, 05:06 AM

hey,
friends please tell me that what company is best for tools for drilling in the wood
which i briught from india
They are still made and available from places like Garrettwade.com. I also use the much smaller version for drilling starter holes for scroll saw work...
____________________-

Used Auto Parts | Used Car Parts

handtooled · 07-26-2010, 09:08 AM

Hello, all --

I own a regular brace & bit, a double-geared hand drill (the kind with the bits stored in the handle), and a right-angle brace & bit type designed to drill holes in hard-to-reach spots (e.g. where there isn't enough room to turn the handle). I use them all fairly regularly because I like the quiet sound they make, and because it reminds me to take care of them so that they don't rust for lack of activity and maintenance.
Yes they are more cumbersome to use but . . . they support my "measure three times cut once" style of woodworking.

03-01-2009, 07:36 AM	#1 (permalink)
Taggart Member Join Date: Jan 2009 Posts: 154	Hand Drills I guess they're pretty much just antiques now, but have you ever used a hand drill on wood? When I was a kid there were some around our place, and I'm sure I used them. I find it very nostalgic to see some of those old tools now.

01-25-2010, 12:07 PM	#11 (permalink)
danrpierce Norm Abram Wannabe Join Date: Jan 2010 Location: Eden Prairie, MN Posts: 1	I remember my dad had a similar tool but it was a screwdriver that turned when you pushed down. http://www.danmacleod.com/Articles/T...crewdriver.jpg http://www.danmacleod.com/Articles/E..._Tradition.htm __________________ http://www.mywoodworking.net

07-08-2010, 05:06 AM	#12 (permalink)
infotechproximity9 Junior Member Join Date: Jul 2010 Posts: 1	Hand Drills hey, friends please tell me that what company is best for tools for drilling in the wood which i briught from india They are still made and available from places like Garrettwade.com. I also use the much smaller version for drilling starter holes for scroll saw work... ____________________- Used Auto Parts \| Used Car Parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2009, 09:44 AM	#2 (permalink)
Twiceshy Junior Member Join Date: Feb 2009 Posts: 78	If the economy continues to slide downhill, we may all have to use hand tools! We keep an eye out for non-electric tools, these days, because we want to be prepared to perform basic nome repairs without having to plug in.

03-01-2009, 01:05 PM	#3 (permalink)
Kitten Junior Member Join Date: Feb 2009 Posts: 35	I remember my Mom using hand drills (she was much more into woodwork, building, etc, than my dad was) when I was younger, but I haven't actually used them myself.

03-02-2009, 07:19 AM	#4 (permalink)
Taggart Member Join Date: Jan 2009 Posts: 154	If anyone's interested in getting some, I'd suggest checking out the contents sales of houses that have been recently sold. That's where I saw some interesting tools that were probably technically antiques.

03-03-2009, 08:29 AM	#5 (permalink)
oldnamvet Member Join Date: Feb 2009 Location: Mid michigan Posts: 114	I regularly use a brace & bit outside, especially for larger holes in posts or landscape timbers. It is less work than dragging out the power drill and spade bits. For just a starter hole somewhere in the house, I usually use an old Stanley Yankee push drill. If I have a bunch to do, I go for the power drill.

03-03-2009, 08:43 AM	#7 (permalink)
oldnamvet Member Join Date: Feb 2009 Location: Mid michigan Posts: 114	That is the one. Bits don't look like typical drill bits but they work great for quick pilot holes. They are still made and available from places like Garrettwade.com. I also use the much smaller version for drilling starter holes for scroll saw work. Holes are typically smaller than 1/16".

03-04-2009, 05:35 AM	#8 (permalink)
chocoguy Junior Member Join Date: Feb 2009 Posts: 78	I guess that it differs from country to country. In my country we are still hand drills hand drills. My father has one but I couldn’t see it anymore.

03-10-2009, 04:43 PM	#9 (permalink)
angelicwriter Junior Member Join Date: Feb 2009 Posts: 23	You know it's this site that lets people auction off and buy old woodworking tools. It's called Oldtools. The site is nice for anyone looking for nostalgic tools. Here's the link

01-13-2010, 03:06 PM	#10 (permalink)
woodworking Junior Member Join Date: Jan 2010 Posts: 4	I've used hand drills on two different occasions: 1. For maple syrup operation in rural Ontario. Brace and bit drill set-up drills 1/2" holes in hard maple very well. 2. For timber framing on a remote site with no power. Pump-type of hand drill worked very well for small diameter predrilling This worked well enough for me to consider buying a hand drill for remote woodworking. Never followed through, though.

07-26-2010, 09:08 AM	#13 (permalink)
handtooled Junior Member Join Date: Jul 2010 Posts: 3	Hello, all -- I own a regular brace & bit, a double-geared hand drill (the kind with the bits stored in the handle), and a right-angle brace & bit type designed to drill holes in hard-to-reach spots (e.g. where there isn't enough room to turn the handle). I use them all fairly regularly because I like the quiet sound they make, and because it reminds me to take care of them so that they don't rust for lack of activity and maintenance. Yes they are more cumbersome to use but . . . they support my "measure three times cut once" style of woodworking.