Sharpening Guide

johnk · 01-26-2009, 09:34 AM

Sharpening Guide

WoodWrangler · 02-02-2009, 03:04 PM

The best stuff is the simple stuff. Thanks for sharing.

Wood Gnome · 02-05-2009, 07:53 PM

That's really a good guide. I printed it off so that I could make my own for sharpening my chisels. This site is really great for beginners. I have only been on the site for the last few days and already have found so much excellent information.

woodpecker · 02-05-2009, 09:44 PM

I am a struggling amateur, and I am happy to note that you have loads of interesting, useful stuff over here. Thanks for these simply great tips. I just took a print out of not only this file, but also the ones in your other threads. They are going to come in very useful.

Woodyoumind? · 02-09-2009, 10:55 PM

Boy, my dad could put an edge on anything that you coud split a hair with. I was too foolish in my younger days to stop and let him teach me how to do it, but I sure do wish I had listened and learned now.

hermitguy · 03-03-2009, 02:57 PM

This looks like a simple way to sharpen chisels for the average guy who can't afford the big $$$'s they want for much more complicated devices that do the same thing. By the way, I checked a new block plane and spokeshave that I had Rockler hone before delivering, and the angle was 25 degrees on the plane blades also.

chocoguy · 03-04-2009, 05:39 AM

Thanks for providing a download about this.

Even if I used to work with late machine, I am not the one who is doing the sharpening for the blades. There is a division that is assigned to that.

angelicwriter · 03-10-2009, 04:32 PM

Thanks for posting this. It's always helpful when you have an instructional guide to reference to. Sharpening requires so much skill. This really helped.

rmenting · 05-15-2009, 06:46 AM

My biggest challenge is holding the blade steady beacuse of a nervous tremor in my right hand. You have solved the problem. Thankyou very much. It works great

peerawit · 05-31-2009, 06:37 AM

That's really help.. Thank

05-15-2009, 06:46 AM	#9 (permalink)
rmenting RJM Join Date: May 2009 Location: Richmond Va Posts: 1	Thank You My biggest challenge is holding the blade steady beacuse of a nervous tremor in my right hand. You have solved the problem. Thankyou very much. It works great

05-31-2009, 06:37 AM	#10 (permalink)
peerawit Junior Member Join Date: May 2009 Posts: 9	That's really help.. Thank __________________ Fein blade\|Power tool\|rockwell sonicrafter\|rockwell sonicraft\|rockwell sonic rafter\|fein multimaster tool saw blade\|fein multimaster blade\|Battery Pack\|forrest saw blade

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-02-2009, 03:04 PM	#2 (permalink)
WoodWrangler Junior Member Join Date: Feb 2009 Location: Charlotte, NC Posts: 16	The best stuff is the simple stuff. Thanks for sharing.

02-05-2009, 07:53 PM	#3 (permalink)
Wood Gnome Junior Member Join Date: Feb 2009 Posts: 25	That's really a good guide. I printed it off so that I could make my own for sharpening my chisels. This site is really great for beginners. I have only been on the site for the last few days and already have found so much excellent information.

02-05-2009, 09:44 PM	#4 (permalink)
woodpecker Junior Member Join Date: Feb 2009 Posts: 30	I am a struggling amateur, and I am happy to note that you have loads of interesting, useful stuff over here. Thanks for these simply great tips. I just took a print out of not only this file, but also the ones in your other threads. They are going to come in very useful.

02-09-2009, 10:55 PM	#5 (permalink)
Woodyoumind? Junior Member Join Date: Feb 2009 Posts: 26	Boy, my dad could put an edge on anything that you coud split a hair with. I was too foolish in my younger days to stop and let him teach me how to do it, but I sure do wish I had listened and learned now.

03-03-2009, 02:57 PM	#6 (permalink)
hermitguy Steelers Rule! Join Date: Mar 2009 Location: Hermitage,PA 16148 Posts: 1	This looks like a simple way to sharpen chisels for the average guy who can't afford the big $$$'s they want for much more complicated devices that do the same thing. By the way, I checked a new block plane and spokeshave that I had Rockler hone before delivering, and the angle was 25 degrees on the plane blades also.

03-04-2009, 05:39 AM	#7 (permalink)
chocoguy Junior Member Join Date: Feb 2009 Posts: 78	Thanks for providing a download about this. Even if I used to work with late machine, I am not the one who is doing the sharpening for the blades. There is a division that is assigned to that.

03-10-2009, 04:32 PM	#8 (permalink)
angelicwriter Junior Member Join Date: Feb 2009 Posts: 23	Thanks for posting this. It's always helpful when you have an instructional guide to reference to. Sharpening requires so much skill. This really helped.